盛敏，講席教授，博導🧛🏼，華理反應安全中心主任（籌）(https://rcsc.ecust.edu.cn/)

Min Sheng，Chair Professor，Ph.D. Supervisor，Chair of Reactive Chemical Safety Center @ ECUST (https://rcsc.ecust.edu.cn/en/)

美國註冊專業工程師，國家級重點人才🏓，上海市海外領軍人才🧏🏽‍♂️。曾就職於美國陶氏化學總部📤，陶氏杜邦農化公司🛩，擔任全球反應安全專家，實驗室主任和技術主管等職位，管理過陶氏化學全球總部(美國密西根)的反應危險品安全實驗室和杜邦公司全球唯一的爆炸危害實驗室，其中陶氏總部的實驗室曾發明了目前電池熱安全和化工反應安全風險評估中廣泛應用的絕熱加速熱量儀（ARC）👩‍💻。

Registered Professional Engineer (P.E.) in Michigan State, USA. Had led the Dow Reactive Chemicals (RC) lab in Midland, Michigan (Dow global headquarter) and the DuPont explosion hazard lab (the only reactivity hazard lab in DuPont globally). This Dow RC lab invented the accelerating rate calorimeter (ARC) in the 1979, which is still one of the most popular tools for reactivity hazard evaluation of both chemical process and Lithium battery.

聯系方式：

地址：上海市梅隴路130號EON4注册實驗8樓333室

Email🙇🏿‍♀️：P2SAC safety center

Editorial Advisory Board member of ACS Chemical Health & Safety

主要承擔的科研項目👨🏼‍🚒：

（1）一手創立陶氏杜邦農化公司的反應危險品安全部🛣，建立兩個全新測試中心⚅，培訓過3位反應安全專家和6位實驗分析員，2017.8-2022.3

（2）創立聯合國新運輸法規要求的“單體自加速聚合溫度” (SAPT)的恒溫熱量儀測試的新方法，2015.1-2017.12🦸‍♀️，主持

（3）正在修訂ASTM E537（差分掃描量熱儀DSC的熱安全測試標準），ASTM E1981（絕熱加速量熱儀ARC的熱安全測試標準）和ASTM E680（爆炸品壓敏測試標準）🍍，2019.10-目前，主持

  Main Projects✋🏿♦️：

(1) Established the RC group for DowDuPont Ag Division, built two new RC testing labs, and trained three RC SMEs and six RC analysts, 2017.8-2022.3

(2) Developed a new isothermal calorimetric testing method to determine the monomer Self-Accelerating Polymerization Temperature (SAPT) for a new transportation regulation of The United Nations, led the team from a joint session of several industry consortia committees (Basic Acrylic Monomer Manufacturers, European Basic Acrylate Manufacturers, and Methacrylate Producers Association), 2015.1-2017.12

(3) Leading the update of ASTM E537 (Standard Test Method for The Thermal Stability of Chemicals by Differential Scanning Calorimetry), ASTM E1981 (Standard Guide for Assessing Thermal Stability of Materials by Methods of Accelerating Rate Calorimetry), and ASTM E680 (Standard Test Method for Drop Weight Impact Sensitivity of Solid-Phase Hazardous Materials), From 2019.10 to now.

代表性論文(Representative publications)

吳展華，盛敏🪮，絕熱加速量熱儀在反應安全風險評估應用中的常見問題，化工進展👮‍♀️，2023，42（7）💃🏽，3374-3382👩‍👩‍👧，（https://hgjz.cip.com.cn/CN/10.16085/j.issn.1000-6613.2023-0509）

Min Sheng*, Practical Estimation Techniques of Reaction Heat, Org. Process Res. Dev. 2021, 25, 8, 1862–1872

Min Sheng*, Qiang Yang*, Darren Huff, Andrew Schafer, Craig Tucker, Daniel Valco, Thermal Instability and Associated Potential Safety Hazards of Rhodium(I) Precatalyst Complexes with weakly Coordinated Ligands, Org. Process Res. Dev., 2021, 25, 4, 1054–1064.

Min Sheng*, Daniel Valco and Craig Tucker, Heat Loss in ARC Analysis and Thermal Lag for High Self-Heat Rates, Org. Process Res. Dev., 2021, 25, 1, 108-119.

Yang, Qiang*; Sheng, Min; Yongliang Huang; Potential Safety Hazards Associated with Using N,N-Dimethylformamide in Chemical Reactions, Org. Process Res. Dev., 2020, 24, 9, 1586–1601

Qiang Yang*; Min Sheng; et al., Potential Explosion Hazards Associated with the Autocatalytic Thermal Decomposition of Dimethyl Sulfoxide and Its Mixtures, Org. Process Res. Dev., 2020, 24, 6, 916–939.

Min Sheng*, Daniel Valco, Craig Tucker, Elizabeth Cayo, Tyler Lopez, Practical Use of Differential Scanning Calorimetry (DSC) for Thermal Stability Hazard Evaluation, Org. Process Res. Dev., 2019, 23, 10, 2200-2209.

Qiang Yang*; Min Sheng; James Henkelis; et al., Explosion Hazards of NaH in DMSO, DMF and DMAc, Org. Process Res. Dev., 2019, 23(10), 2210-2217

Min Sheng, Florin Dan, et al., Calorimetric Method To Determine Self-Accelerating Polymerization Temperature (SAPT) for Monomer Transportation Regulation: A Heat Balance Approach, Org. Process Res. Dev., 2019, 23 (5), pp 750-761

Min Sheng*, Florin Dan, et al., Calorimetric Method To Determine Self-Accelerating Polymerization Temperature (SAPT) for Monomer Transportation Regulation: Kinetics and Screening Criteria, Org. Process Res. Dev., 2019, 23 (5), pp 737-749

Min Sheng*, D Frurip, D Gorman, Reactive chemical hazards of diazonium salts, Journal of Loss Prevention in the Process Industries, 2015, 38, 114

D. Gorman, J. Farr, R. Bellair, W. Freeman, D. Frurip, A. Hielscher, H. Johnstone, M. Linke, P. Murphy, Min Sheng, K. van Gelder, D. Viveros. Enhanced NOAA chemical reactivity worksheet for determining chemical compatibility, Process Safety Progress, 2014, 33(1), 4–18